Multi-Surface Self Sanitising Anti-Microbial / Anti-Viral Nano Coating

CARE COAT

  • Water borne thin film protection
  • Provides 99% long lasting protection for up to 90 days
  • Proven effective protection against influenza virus (SARS-CoV-2/Covid-19), bacteria using AgNP + QuAT Dual Technology and tested under international standards JIS, ISO, EN and AATCC
  • Self-protection; do not require regular care of surfaces
  • Applied Patent No.: 202021020915

Hygiene Layer that inhabits pathogen spread

Application

Suitable for all surfaces including metal, wood, plastic, glass, fabrics, leather, concrete walls, tiles etc.

Direction of Use

  1. Prepare surface for coating. Surface should be cleaned and free from dust and containments prior to coating
  2. Apply anti-microbial nano coating (Wet on Wet two coats).
    Electrostatic Aero-atomisation Sprayer is recommended and surface finished with fur roller or wiping with a clean cloth/rag.
  3. For smaller surfaces/fittings, coating can be applied using sponge pad/lamb wool paint brush
  4. Allow coated surface to dry for 2 hours. This is to allow nano coat to bond with surface.
  5. After 2 hours, coated surface is protected against 99% of influenza virus (SARS-CoV-2/Covid-19), bacteria and other microbes for up to 90 days.
  6. After 90 days/500 wipes or as required, clean surface and reapply new layer of nano coating again. Previous coating need not be removed.

Multi-Surface Disinfectant

Hygiene Layer that inhabits pathogen spread

CARE SPRAY

  • Water based and enriched with Nano actives
  • 99.9% protection against Influenza virus & Bacteria
  • Activates quickly and remain active on surfaces for 24 hours
  • Easy to use – spray and wipe
  • Nanosilver and Benzalkonium Chloride
  • Cleans and protect all hard and soft surfaces like metal,
    wood, plastic, glass, fabric, floors, tiles, etc.

Direction of Use

  1. Pre clean the surface
  2. Spray on surfaces until thoroughly wet and leave for 10 seconds before wiping

Impact of AC filters on Microbial Growth

  • The air we breathe contains dust, pollen, spores, bacteria, and viruses & other impurities. Microbes are one of the most fundamental indoor air quality problems.
  • Quality of indoor air is worse than the outdoor air because of the lifestyles we follow today.
  • In addition, recent research has shown that certain microorganisms can colonise on the materials used in HVAC filters.
  • The average of microbes moist mass loading on different filters was found to be positively related to the length of incubation period (1, 2, and 3 months).
  • Increased risk of respiratory symptoms, respiratory infections and exacerbation of asthma.

Hygiene Layer that inhabits pathogen spread

Anti-Microbial / Anti-Viral for HVAC Filters

AIR CARE

  • Nanostructure breathable coating for AC filter mesh
  • > 99.9% protection against virus and bacteria
  • Complies to global standards JIS L 1902, AATCC 100, ISO 18184 for soft surfaces
  • Protection against growth of micro-organisms like mould, fungi, yeasts and bacteria
  • Provides clean and fresh air and gives hygiene protection
  • Reducing emission of bad odour

Direction for Use

  1. Prepare filters for coating. Filters should be cleaned and dry.
  2. Apply uniform coat of CARE COAT (For HVAC Filters)
  3. Allow filter to be completely wet.
  4. Allow coated filter to air dry under sunlight for 2 hours or 4 hours at room temperature
  5. After 2 hours, coated surface is protected against 99% of influenza virus (SARS-CoV-2/Covid-19), bacteria and other microbes.